Children, pets and the garage door
CPSC reports about 73 children aged 2 to 14 trapped and killed under automatic garage doors since March 1982, roughly 3 a year. The monthly two-by-four reversal test is the single most useful thing a parent can do, and it takes under a minute.
Why the standard exists
The federal entrapment rules were not written in the abstract. CPSC's Publication 523 records that about 73 children between 2 and 14 have been trapped and killed under automatic garage doors since March 1982, and that others "have suffered brain damage or serious injuries when the closing door hit them, and failed to stop and reverse its direction."
The monthly test
The user instructions federal law requires in every opener manual say it plainly: test the opener monthly, and the door must reverse on contact with a 1½ inch object — a two-by-four laid flat — on the floor. CPSC recommends inspecting the door and opener every 30 days.
If the door does not reverse, stop using the opener until it is adjusted per the manual, repaired, or replaced. A door that fails this test is the exact hazard the standard exists to prevent.
Where the controls belong
CPSC's guidance is specific: install the push button wall control as high as practical on the garage wall to restrict children's access, and keep remote controls away from children. The federally required manual text adds: "Never let children operate, or play with door controls."
The mandated instructions also say to install the opener itself 7 feet or more above the floor where possible, and to remove all pull ropes and disable any locks connected to the door before installing an opener.
The rule to teach
Among the sentences federal law requires in your manual is one worth teaching a child directly: "NEVER GO UNDER A STOPPED PARTIALLY OPEN DOOR." A partially open door is being held by the counterbalance system, and a partially open door is what a running child ducks under.
Pets
The photo eyes sit 4 to 6 inches above the floor, which is high enough that a small animal lying flat in the opening may not break the beam. Do not rely on the sensors as a pet detector — the beam is a horizontal line, not a curtain.
How does a garage door actually hold its own weight?
A garage door is not lifted by the opener — it is lifted by the spring, and the opener only guides it. A residential door weighs 85 to 400 pounds, and the counterbalance holds that weight so the motor only has to overcome friction. That is why springs and cables are professional work while sensors and remotes are not: one group holds the stored energy and the other does not.
Garage door safety covers the balance test and what an unbalanced door does to an opener.
What order should I check things in?
Cheapest and safest first, because that order also happens to be the most likely. Start with the remote battery, then the wall button, then whether the opener has power at the outlet — a tripped GFCI accounts for more "dead openers" than any component failure.
Next check the photo eyes, because a blocked beam does not merely interrupt one cycle. Federal rules require secondary entrapment protection to prevent the opener closing an open door at all while the beam is broken, so a filmed-over lens presents as a completely dead door in the closing direction.
Only then test the door itself. Pull the red release with the door closed and lift by hand. If it moves freely, you have an opener or control problem. If it is very heavy, you have a counterbalance problem, and that is where the DIY path ends.
The federally required text in your own manual draws the same line: it directs cable and spring repairs to a qualified service person, and it says never to go under a stopped, partially open door.
What does federal law actually require here?
Every residential opener manufactured since January 1, 1993 for US sale must meet 16 CFR 1211: a closing door must begin reversing within 2 seconds of hitting an obstruction, a second independent protection system must exist, and the manual release must be red. §1211.16(b) also fixes the exact words your manual carries — among them “Have a qualified service person make repairs to cables, spring assemblies and other hardware.” — which is why this page's verdict is not our opinion.
What UL 325 and 16 CFR 1211 require covers the full standard.
What is the one-minute test everyone should be doing?
The reversal test, monthly, with a 2x4 laid flat in the door's path: it must reverse on contact. If it does not, stop using the opener until it is adjusted, repaired or replaced. It matters because this system fails silently — a door whose reversal has stopped working looks and sounds exactly like one that still does. CPSC recommends inspecting the door and opener every 30 days.
Children, pets and the garage door covers why the standard exists.
At what point should I stop and call someone?
- The door is very heavy by hand with the opener disconnected. The counterbalance has failed.
- You can see a gap in the spring coil, or a cable that is frayed, slack, or off its drum.
- The door sits crooked, higher on one side, or has come off its track. It is still under full tension.
- The door does not reverse on the board test. The entrapment protection is not working.
None of those is calling too early, and the rule worth teaching at home comes from that same federal text: “NEVER GO UNDER A STOPPED PARTIALLY OPEN DOOR.”
Questions that come up next
Does a door that reverses mean something is broken?
No — the opposite. A door that stops and goes back up when it touches something is the entrapment protection doing exactly what 16 CFR 1211 requires. The fault worth investigating is a door that fails to reverse.
Can I disable the photo eyes to get the door closed?
No. That removes the external entrapment protection required since 1993, and it is the protection that exists because of the CPSC child fatality record. If a sensor is genuinely faulty, replace it — it is among the cheapest parts on the door.
Is it safe to use the emergency release with the door open?
The federally required manual text says to use it only when the door is closed wherever possible, because weak or broken springs may allow the door to fall rapidly. A great deal of DIY content advises the opposite.
Should I replace one spring or both?
If the door has two, quote both. The second is the same age and has taken the same number of cycles, so it is next. This is one of the few upsells in the trade that is genuinely honest.
Sources
- Publication 523 — Non-Reversing Automatic Garage Door Openers Are a Hazard — US Consumer Product Safety CommissionTier 1 accessed
- 16 CFR Part 1211 — Safety Standard for Automatic Residential Garage Door Operators — US Consumer Product Safety CommissionTier 1 accessed
- 16 CFR 1211.16 — required installation and user instructions (81 FR 20231) — US CPSC via Federal RegisterTier 1 accessed